$33.83 – $235.76 inc GST
Our recommended glue for use with all foams.
For adhering foams and plastics together, or sticking foam to just about any other solid surface or material.
These pressure sensitive glues are solvent based, which is required for closed-cell foams as they are sealed foams and the adhesive will not be exposed to air for drying of the adhesive.
approx. 4 square metres per litre of glue.
Application Instructions:
Both surfaces need to be cleaned and prepped.
An etching coat of the glue should be applied to both surfaces, then a second coat of the glue should be applied to both surfaces.
When the glue has tacked off on the second coat, only then can the two surfaces be pressed together.
For custom conversion please contact our inhouse team.
PJ Bowers is a proud donator to NV Access – Developing software solutions to give the blind and vision impaired access to computers.
PJ Bowers is a member of the Australian Industry & Defence Network.
ABN: 48 262 646 574
Our corporate website is available at: pjbowers.com.au
Hours: Mon-Fri 8:00AM – 4:00PM
Phone: 07 5593 8277
13 Central Drive,
Burleigh Heads, Queensland 4220
